INSTALLATION INSTRUCTIONS

THE YARD SWIVELER

Materials List

- (2) The Yard Swiveler frame and wheel assemblies
- (4) Bronze bushings
- (4) Detent pins
- (8) Steel shims
- (1) Tube of grease

Installation Preparation

For the quickest and most successful installation, detach the mid-mount mower deck from the tractor.

Alternatively, if a front loader bucket assembly is attached and you feel comfortable using the bucket to lift the front of the tractor, you won't need to remove the mower deck.

Installation Steps

1. Remove and retain the existing roll pin, height-adjuster lever and pin with spring, and the OEM front anti-scalp wheel assemblies.
2. Remove the preassembled upper detent pin, shims, and bronze bushing from each The Yard Swiveler assembly.
3. Apply the provided grease to the inner and outer surfaces of the bronze bushings.
4. Install each The Yard Swiveler wheel assembly into the existing front anti-scalp wheel tube on the mower deck. Make sure the lower detent pin, steel shims, and bronze bushing remain installed on the The Yard Swiveler shaft. Then reinstall the upper bronze bushing, shims, and detent pin.
5. Repeat these instructions for both the left and right sides.